1
NAJAFIAN AREZOO ، JAHANGIRIAN ALIREZA,
"Aeroacoustic evaluation of a new morphing blade design for 1.5 MW wind turbine",
Sustainable Energy Technologies and Assessments,
vol. 91,
no. 105049,
pp.1-9,
2026.
2
AGHABABAEI DEHAGHI HAMID REZA ، JAHANGIRIAN ALIREZA,
"A multi-objective framework for wind farm layout optimization considering land area and performance uniformity",
Energy Conversion and Management,
vol. 1,
no. 357,
pp.1-19,
2026.
3
RAHNI AMIR ، JAHANGIRIAN ALIREZA,
"The Effects of Single and Multiple Dielectric Barrier Discharge Characteristics on Flow Separation Control over NACA0012 Airfoil",
Fluid Dynamics,
vol. 60,
no. 161,
pp.1-24,
2025.
4
REZAEI HAMED ، KAZEMI MOSTAFA ، MANI MAHMOUD ، VAZIRI ZANJANI MOHAMMAD ALI ، JAHANGIRIAN ALIREZA,
"Experimental Study on Stall Cell Formation in High-Wing Commercial Jet under Take-Off Conditions",
Aut Journal of Mechanical Engineering,
vol. 1,
no. 1,
pp.1-21,
2025.
5
REZAEI HAMED ، KAZEMI MOSTAFA ، JAHANGIRIAN ALIREZA ، MANI MAHMOUD ، M. Saeedi,
"Unsteady aerodynamic performance of an airfoil with serpentine DBD plasma actuator",
Journal of Physics D-Applied Physics,
vol. 58,
no. 325201,
pp.1-18,
2025.
6
ALIZADEH NIMA ، JAHANGIRIAN ALIREZA,
"A New Add-On Flap for Performance Improvement of Small Horizontal Axis Wind Turbines",
Energy Science and Engineering,
vol. 1,
no. 1,
pp.1-11,
2025.
7
NAJAFIAN AREZOO ، JAHANGIRIAN ALIREZA,
"Energy optimization through morphing blade design under structural constraints: a case study on the NREL 1.5 MW wind turbine",
Science and Technology For Energy Transition,
vol. 80,
no. 42,
pp.1-15,
2025.
8
RAHNI AMIR ، JAHANGIRIAN ALIREZA,
"Multi-objective optimization of DBD plasma actuator characteristics for turbulent flow separation control over airfoils",
Flow Measurement and Instrumentation,
vol. 105,
no. 102951,
pp.1-15,
2025.
9
REZAYI HAMED ، KAZEMI MOSTAFA ، m. saeedi ، JAHANGIRIAN ALIREZA ، MANI MAHMOUD,
"Experimental investigation of the effects of different DBD plasma actuators on the aerodynamic performance of the NACA0012 airfoil",
Journal of Physics D-Applied Physics,
vol. 58,
no. 1,
pp.1-13,
2025.
10
NAJAFIAN AREZOO ، JAHANGIRIAN ALIREZA,
"Maximum annual energy production of a 1.5 MW wind turbine using optimum morphing blades at different control management scenarios",
Energy Conversion and Management,
vol. 326,
no. 1,
pp.1-14,
2024.
11
AHMADKHAH SOROUSH ، JAHANGIRIAN ALIREZA ، ZARINVAFA AMIRHOSEIN,
"Aerodynamic Performance of Different Trailing-edge Serrations for High Reynolds Number Flows around Wing-flap System",
Journal of Applied Fluid Mechanics,
vol. 18,
no. 4,
pp.1035-1047,
2024.
12
RAJABI MILAD ، JAHANGIRIAN ALIREZA,
"Design Optimization of a Morphing Winglet for all Flight Missions of a Civil Aircraft",
Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering,
vol. 1,
no. 1,
pp.1-14,
2024.
13
NEMATI MEISAM ، JAHANGIRIAN ALIREZA,
"A Data-Driven Machine Learning Approach for Turbulent Flow Field Prediction Based on Direct Computational Fluid Dynamics Database",
Journal of Applied Fluid Mechanics,
vol. 17,
no. 1,
pp.60-74,
2023.
14
NAJAFIAN AREZOO ، JAHANGIRIAN ALIREZA,
"Optimum design of morphing flaps for improving horizontal axis wind turbine performance",
Energy Science and Engineering,
vol. 2023,
no. 1,
pp.1-13,
2023.
15
SABERMOQADDAM ALI ، JAHANGIRIAN ALIREZA,
"Aerodynamic Evaluation and Modification of Tehran International Tower Section Exposed to Annual Winds",
Amirkabir Journal of Mechanical Engineering,
vol. 1,
no. 1,
pp.1-28,
2022.
16
ROHANI SEYED VAHIDREZA ، JAHANGIRIAN ALIREZA,
"A Fast and Efficient Method for Multi-objective Aerodynamic Optimization of a Civil Aircraft Fuselage",
Journal of Aerospace Engineering,
vol. 35,
no. 6,
pp.1-11,
2022.
17
ALIZADEH NIMA ، JAHANGIRIAN ALIREZA,
"Optimum Design of Blade Flaps for Improving the Power Generation of a Horizontal Axis Wind Turbine",
,
vol. 1,
no. 1,
pp.1-20,
2022.
18
HEIDARI SORESHJANI MASOUD ، JAHANGIRIAN ALIREZA,
"A New Metaheuristic Method with Applications to Airfoil Shape Optimization",
Aut Journal of Mechanical Engineering,
vol. 0,
no. 0,
pp.1-10,
2021.
19
AZIZI MAHDI ، JAHANGIRIAN ALIREZA,
"Aerodynamic Optimization of a Wind Turbine Blade for Maximum Annual Energy Production at Manjil Wind Farm",
Journal of Aerospace Science and Technology,
vol. 14,
no. 2,
pp.1-9,
2021.
20
HEIDARI SORESHJANI MASOUD ، JAHANGIRIAN ALIREZA,
"An investigation on winglet design with limited computational cost, using an efficient optimization method",
Aerospace Science and Technology,
vol. 1,
no. 1,
pp.1-17,
2021.
21
ROUHOLLAHI AMIRHOSSEIN ، JAHANGIRIAN ALIREZA ، HEIDARI SORESHJANI MASOUD,
"A Numerical Investigation on the Effect of Blade Tip Shapes on Power Generation of a Horizontal Axis Wind Turbine",
,
vol. 1,
no. 1,
pp.1-10,
2021.
22
NEMATI MEISAM ، JAHANGIRIAN ALIREZA,
"Robust aerodynamic morphing shape optimization for high-lift missions",
Aerospace Science and Technology,
vol. 103,
no. 0,
pp.1-10,
2020.
23
JAHANGIRIAN ALIREZA ، ERFANIAN SEYED AHMADREZA,
"Turbulent Flow Control over Circular Cylinder using Combination of Splitter Plate and Control Cylinder",
,
vol. 36,
no. 1,
pp.3-10,
2020.
24
KABIRIAN SIAVASH ، JAHANGIRIAN ALIREZA,
"Investigation of different aspects of DBD Plasma Actuators on airflow around a Wing",
,
vol. 36,
no. 1,
pp.19-28,
2020.
25
AZIZI MAHDI ، JAHANGIRIAN ALIREZA,
"Multi-site aerodynamic optimization of wind turbine blades for maximum annual energy production in East Iran",
Energy Science and Engineering,
vol. 1,
no. 1,
pp.1-18,
2020.
26
NEMATI MEISAM ، JAHANGIRIAN ALIREZA,
"The effects of viscosity on design optimization of transonic airfoils using enhanced Genetic Algorithm",
,
vol. 35-3,
no. 1,
pp.33-42,
2019.
27
KHOSHKHOO ROOHOLLH ، JAHANGIRIAN ALIREZA ، farzaneh sharafbafi,
"analysis of fleet type impact on the threats and errors of an airline using line operations safety audit (LOSA)",
Aviation,
vol. 22,
no. 1,
pp.31-39,
2018.
28
TIMNAK NARJES ، JAHANGIRIAN ALIREZA ، SEYYEDSALEHI S.ALI,
"An optimum neural network for evolutionary aerodynamic shape design",
Scientia Iranica,
vol. 24,
no. 5,
pp.2490-2500,
2017.
29
EBRAHIMI MEHDI ، JAHANGIRIAN ALIREZA,
"Airfoil Shape Optimization with Adaptive Mutation Genetic Algorithm",
Journal of Aerospace Science and Technology,
vol. 11,
no. 1,
pp.47-59,
2017.
30
EBRAHIMI MEHDI ، JAHANGIRIAN ALIREZA,
"Accelerating global optimization of aerodynamic shapes using a new surrogate-assisted parallel genetic algorithm",
Engineering Optimization,
vol. 0,
no. 0,
pp.1-16,
2017.
31
SEIFOLLAHI MOGHADAM ZAHRA ، JAHANGIRIAN ALIREZA,
"Flow Control of Transonic Airfoils using Optimum Suction and Injection Parameters",
Journal of Applied Fluid Mechanics,
vol. 10,
no. 1,
pp.103-115,
2016.
32
TIMNAK NARJES ، JAHANGIRIAN ALIREZA,
"Multi-point optimization of transonic airfoils using an enhanced genetic algorithm",
Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering,
vol. 0,
no. 0,
pp.1-14,
2016.
33
KHOSHKHOO ROOHOLLH ، JAHANGIRIAN ALIREZA,
"Numerical Simulation of Stall Flow Control Using a DBD Plasma Actuator in Pulse Mode",
Plasma Science and Technology,
vol. 18,
no. 9,
pp.933-942,
2016.
34
EBRAHIMI MEHDI ، JAHANGIRIAN ALIREZA,
"A Hierarchical Parallel Strategy for Aerodynamic Shape Optimization with Genetic Algorithm",
Scientia Iranica,
vol. 22,
no. 6,
pp.2379-2388,
2015.
35
abas niknegad ، JAHANGIRIAN ALIREZA ، SHAMIRI ALIREZA ، hesam asiaee,
"Using elliptic energy absorbers in automobile for pedestrain safety",
,
vol. 24,
no. 101,
pp.62-72,
2015.
36
KHOSHKHOO ROOHOLLH ، JAHANGIRIAN ALIREZA,
"numerical simulation of flow separation control using multiple DBD plasma actuators",
Journal of Applied Fluid Mechanics,
vol. 9,
no. 4,
pp.1-22,
2015.
37
SATTARZADEH SAMAD ، JAHANGIRIAN ALIREZA ، SHAHVERDI HOSEIN,
"Aeroelastic Analysis of a Typical Section using Euler and Navier-Stokes Mesh-less Method",
Scientia Iranica,
vol. 0,
no. 0,
pp.1-30,
2015.
38
SATTARZADEH SAMAD ، JAHANGIRIAN ALIREZA,
"A Comparative Study on Various Adaptive Meshless Methods for Steady and Unsteady Flow Calculations",
Scientia Iranica,
vol. 0,
no. 0,
pp.1-25,
2015.
39
SATTARZADEH SAMAD ، JAHANGIRIAN ALIREZA ، M.Y. Hashemi,
"Unsteady compressible flow calculations with least-square mesh-less method",
Journal of Applied Fluid Mechanics,
vol. 9,
no. 3,
pp.1-11,
2015.
40
KHOSHKHOO ROOHOLLH ، JAHANGIRIAN ALIREZA,
"Flow separation control over airfoils using DBD plasma body force",
Journal of The Brazilian Society of Mechanical Sciences and Engineering,
vol. 2014,
no. 1,
pp.1-13,
2014.
41
EBRAHIMI MEHDI ، JAHANGIRIAN ALIREZA,
"Aerodynamic Optimization of Airfoils Using Adaptive Parameterization and Genetic Algorithm",
Journal of Optimization Theory and Applications,
vol. 1,
no. 1,
pp.1-11,
2013.
42
SANAEIKIA ALI REZA ، JAHANGIRIAN ALIREZA,
"The effects of wind tunnel walls on flow over oscillating airfoils",
,
vol. 1,
no. 1,
pp.1-10,
2013.
43
NAMVAR MORTEZA ، JAHANGIRIAN ALIREZA,
"An investigation of mesh-less calculation for compressible turbulent flows",
Computers and Fluids,
vol. 86,
no. 2013,
pp.483-489,
2013.
44
EBRAHIMI MEHDI ، JAHANGIRIAN ALIREZA,
"New analytical formulations for calculation of dispersion parameters of Gaussian model using parallel CFD",
Environmental Fluid Mechanics,
vol. 13,
no. 2,
pp.125-144,
2012.
45
SATTARZADEH SAMAD ، JAHANGIRIAN ALIREZA,
"3D implicit mesh-less method for compressible flow calculations",
Scientia Iranica,
vol. 19,
no. 3,
pp.503-512,
2012.
46
JAHANGIRIAN ALIREZA ، HASHEMI MIR YOSEPH,
"Adaptive Cartesian grid with mesh-less zones for compressible flow calculations",
Computers and Fluids,
vol. 54,
no. 54,
pp.10-17,
2012.
47
HASHEMI MIR YOSEPH ، JAHANGIRIAN ALIREZA,
"An efficient implicit mesh-less method for compressible flow calculations",
International Journal For Numerical Methods In Fluids,
vol. 67,
no. 6,
pp.754-770,
2011.
48
JAHANGIRIAN ALIREZA ، ava shahrokhi,
"Aerodynamic shape optimization using efficient evolutionary algorithms and unstructured CFD solver",
Computers and Fluids,
vol. 46,
no. 1,
pp.270-276,
2011.
49
MOTAREKAT OMID ، JAHANGIRIAN ALIREZA,
"A hybrid cartesian grid generation method for aerodynamic computation of viscous flows",
,
vol. 12,
no. 2,
pp.1-8,
2010.
50
HASHEMI MIR YOSEPH ، JAHANGIRIAN ALIREZA,
"Implicit fully mesh-less method for compressible viscous flow calculations",
Journal of Computational and Applied Mathematics,
vol. 0,
no. 0,
,
2010.
51
SHAHROKHI AVA ، JAHANGIRIAN ALIREZA,
"A surrogate assisted evolutionary optimization method with application to the transonic airfoil design",
Engineering Optimization,
vol. 42,
no. 6,
,
2010.
52
JAHANGIRIAN ALIREZA ، SHAHROKHI AVA,
"Inverse Design of Transonic Airfoils Using Genetic Algorithm and a New Parametric Shape Method",
Inverse Problems In Science and Engineering,
vol. ,
no. 5,
,
2009.
53
JAHANGIRIAN ALIREZA ، SHORAKA YASHAR,
"Adaptive unstructured grid generation for engineering computation of aerodynamic flows",
Mathematics and Computers In Simulation,
vol. ,
no. 78,
,
2008.
54
HASHEMI MIR YOSEPH ، JAHANGIRIAN ALIREZA,
"Simulation of High-Speed Flows by an Unstructured Grid Implicit Method Including Real Gas Effects",
International Journal For Numerical Methods In Fluids,
vol. ,
no. 56,
,
2008.
55
SHAHROKHI AVA ، JAHANGIRIAN ALIREZA,
"The Effects of Shape Parameterization on The Efficiency of Evolutionary Design Optimization for Viscous Transonic Airfoils",
,
vol. ,
no. 1,
,
2008.
56
SHAHROKHI AVA ، JAHANGIRIAN ALIREZA,
"Airfoil Shape Parameterization for Optimum Navier-Stokes Design With Genetic Algorithm",
,
vol. ,
no. 11,
,
2007.
57
HADIDOOABI MOSTAFA ، JAHANGIRIAN ALIREZA,
"An Efficient Implicit Method for Solution of Compressible Turbulent Flows on Unstructured Grids",
,
vol. ,
no. 3,
,
2005.
58
HADIDOOABI MOSTAFA ، JAHANGIRIAN ALIREZA,
"Two- Equation Turbulence Modeling of Unsteady Flows Using Dual _ Time Implicit Method on Unstructured Grids",
,
vol. ,
no. 13,
,
2005.
59
JAHANGIRIAN ALIREZA ، HADIDOOLABI MOSTAFA,
"Unstructured moving grids for implicit calculation of unsteady compressible viscous flows",
International Journal For Numerical Methods In Fluids,
vol. ,
no. ,
,
2005.
60
JAHANGIRIAN ALIREZA ، ARABI NAREHEI SINA,
"On efficiency of an unstructured grid generation method for aerospace applications",
,
vol. ,
no. 1,
,
2005.